Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
PRODUCT
SE 130.01 Truss Beam: Warren Girder
Education / GUNT Hamburg / Engineering Mechanics and Machine Elements / Statics /
description

Warren truss beams are frequently used on steel constructions. 
  Experiments with the truss SE 130.01 are mounted on the frame of the SE 130 unit. The mechanical construction of the truss ensures that only tensile or compressive forces are active in the bars. The connection between the bars by means of node discs is "hinged". So this can be described as an ideal truss.
  The force in the bars is measured using strain gauges. Owing to the symmetrical construction, only half of the bars have strain gauges on them. All strain gauge connections are housed together in the strain gauge box.

 

Learning Objectives / Experiments

- Calculation of tensile and compressive forces in bars in different load

  cases: straight and inclined forces
- Comparison of measurement results with mathematical methods
  * method of joints, Ritter’s method of sections, Cremona diagram

Specification

[1] Investigation of bar forces in a single plane, statically determinate truss
[2] Ready assembled Warren truss beam
[3] Influence of dead-weight minimised by horizontal experiment layout
[4] Any straight and inclined load cases possible
[5] Pre-balanced strain gauge connection box 
[6] SE 130.01 is a supplementary set for the main unit SE 130

 

Technical Data

Truss beam: Warren type 
- bar cross-section: 10x3mm, stainless steel
- bar lengths: 270mm, 186.5mm
- tensile force: max. 600N
- bars: 13, of which 7 with strain gauge measuring

  points
Node discs: 8

 

Dimensions and Weight
l x w x h: approx. 800 x 300 x 15 mm
Weight: approx. 8 kg
Scope of Delivery

1 truss beam: Warren type

1 strain gauge connection box

1 ribbon cable

Order Details
022.13001  SE 130.01  Truss Beam: Warren Girder