Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
RT 310 Calibration Station
Education / GUNT Hamburg / Process Engineering / Components and Calibration /

The calibration station is used in the investigation of the transmission behaviour of electrical and pneumatic control loop components. Electrical and pneumatic signals can be generated to effect actuation of the individual control loop components. A precision measuring technique facilitates the recording of the output signals from the control loop components. The supply of auxiliary power necessary for many control loop components is also provided.
  Three pressure regulators with manometers are included to generate pneumatic signals. They can also be used to supply the components with auxiliary power. A power supply unit with adjustable voltage and current serves as the DC voltage source. Two switchable AC voltage sources supply auxiliary power. Two potentiometers can be used to simulate the behaviour of various devices such as resistance teletransmitters or motorized valves.
  Three digital pressure gauges, a voltmeter, an ammeter and a 3-channel line recorder are provided for recording the output signals from the control loop components.
  An industrial controller can be used to generate signals in the form of functions and to measure signals. It features three input channels and two output channels which are freely configurable. A separate high-grade universal calibrator further enhances the practical value of this unit. As an example, the calibrator facilitates the simulation of output signals from thermocouples and the measurement of the resulting output signal from a connected transducer.

  Various control loop components such as transducers, control valves and controllers are available as accessories. They are inserted in the calibration station frame and connected by way of the supplied hoses and cables.


Learning Objectives / Experiments

Together with the accessory control loop components
- mode of operation of control loop components
  * transducers
  * actuators
  * controllers
- familiarisation with different signals 
  * pneumatic
  * electrical
- correct connection of control loop components
- transmission behaviour of control loop



[1] investigation of transmission behaviour and calibration of electronic and pneumatic control loop components
[2] sending and measuring pneumatic and electrical signals
[3] 3 pressure regulators with manometers
[4] adjustable power supply unit as DC voltage source
[5] 2 switchable AC voltage sources with differing voltages
[6] 3 digital pressure gauges with differing measuring ranges
[7] 2 adjustable potentiometers
[8] freely configurable industrial controller
[9] digital voltmeter
[10] digital ammeter
[11] 3-channel line recorder with freely selectable measuring ranges
[12] separate high-grade universal calibrator for voltage, current, temperature and resistance


Technical Data

3 pressure regulators
- 1x 0...2bar
- 2x 0...8bar
Power supply unit
- voltage: 0...30VDC
- current: 0...5A
2 AC voltage sources
- 24VAC
- 230VAC
Pressure gauge measuring ranges
- 0...0,6bar
- 0...2,5bar
- 0...10bar
2 potentiometers
- 0...100 Ohm
- 0...500 Ohm
Voltmeter: 0...20VDC
Ammeter: 0...20mA


Dimensions and Weight
LxWxH: 1.520x750x1.800mm
Weight: approx. 130kg
Required for Operation
230V, 50/60Hz, 1 phase
Compressed air connection: 6...8bar
Scope of Delivery
1 calibration station
1 universal calibrator
1 set of cables
1 set of compressed air hoses 
1 set of instructional material
Order Details
080.31000  RT 310  Calibration Station