Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
PRODUCT
RT 050 Training System: Speed Control, HSI
Education / GUNT Hamburg / Process Engineering / Fundamentals of Control Engineering /
description

This compact experimental unit offers every opportunity to learn the fundamentals of control engineering through experimentation on a  speed control system.

 

  The experimental set-up is mounted on a housing which accommodates all the electronics. A transparent protective cover permits safe observation of the experiments. A DC motor drives a shaft with a mass flywheel. The dial gauge allows the speed to be read off directly at any time. The speed is measured inductively using a speed sensor. The output signal from the sensor is sent to the software controller. The output signal from the controller influences the motor current. A generator acting as a mechanical resistance to shaft rotation can be activated by the software to study the influence of disturbance variables.

  The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the experimental unit and the PC is made via a USB port.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- fundamentals of control engineering based on the

  example of a speed control system with PT1

  behaviour
- open loop control response
- effects of different controller parameters and

  methods on the response of the closed loop

  system

- recording of step responses 
  * reference variable
  * disturbance variable
- controller optimisation
- software-based controlled system simulation
  * comparison of different controlled system parameters

Specification

[1] experimental unit for control engineering experiments
[2] speed control of a DC motor with shaft and flywheel
[3] transparent protective cover for motor/generator set
[4] inductive speed sensor
[5] generation of disturbance variables by adjustable generator load
[6] software-based controlled system simulation
[7] process schematic on front panel
[8] networkable LabVIEW software via USB under Windows XP or Windows Vista

 

Technical Data

Motor
- max. speed: 4.500min-1 
- max. motor power output: 10W
- max. torque: 1,7Ncm
Generator
- max. speed: 4.500min-1
- max. power output: 10W
- max. torque: 1,7Ncm
Tachometer (analogue): 0...6.000min-1
Software controller configurable as P, PI and PID controller
Software
- process schematic with controller type selection

  (manual, continuous controller, programmer) 
- time functions
- simulation function
- disturbance variable input

 

Dimensions and Weight
LxWxH: 600x410x310mm
Weight: approx. 17kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery

1 experimental unit
1 software package, complete with USB cable
1 handbook: fundamentals of control engineering

   (RT 010 - RT 060)
1 instruction manual for RT 050

Order Details

080.05000  RT 050  Training System: Speed Control, HSI