PRODUCT
- Education
- K AND H Products
- Automatic Control System
- Autotronics System
- Biomedical Measurement System
- Communication System
- Data Communication and Networking
- Electrical Machine Power Electronics
- Electronic Trainer Equipment Breadboard Accessor
- DL-400 Logic Trainer
- DT-01 Digital Trainer
- ETS-5000 Advanced Digital Training System
- ETS-7000 Digital-Analog Training System
- IC Tool
- IDL-600 Analog Lab
- IDL-800 Digital Lab
- LT-1000 Digital Learners Teacher
- OLS-1000 Analog Overlay Learning System
- OLS-2000 Digital Overlay Learning System
- PP-272/PBU-312 Power Project Board/Circuit Lab
- Test Leads & Accessories
- Electronics Circuits System
- Green Energy System
- Industrial Control System
- Microcomputer Control System
- Refrigeration & Air Condition System
- Testing Instrument
- GUNT Hamburg
- Engineering Mechanics and Machine Elements
- Statics
- EM 049 Equilibrium of Moments on a Two-Arm Lever
- FL 111 Forces in a Simple Bar Structure
- SE 110.12 Lines of Influence on the Gerber Beam
- SE 110.16 Parabolic Arch
- SE 110.17 Three-Hinged Arch
- SE 110.18 Forces on a Suspension Bridge
- SE 110.21 Forces in Various Single Plane Trusses
- SE 110.22 Forces in an Overdeterminate Truss
- SE 110.50 Cable under Dead-Weight
- SE 110.53 Equilibrium in a Single Plane, Statically Determinate System
- SE 112 Mounting Frame
- SE 130 Forces in a Howe Truss
- SE 130.01 Truss Beam: Warren Girder
- TM 110 Fundamentals of Statics
- TM 110.01 Supplementary Set - Inclined Plane and Friction
- TM 110.02 Supplementary Set - Pulley Blocks
- TM 110.03 Supplementary Set - Gear Wheels
- TM 115 Forces in a Crane Jib
- TM 200 Fundamentals of Mechanical Friction
- TM 210 Dry Friction
- TM 225 Friction on the Inclined Plane
- TM 232 Bearing Friction
- WP 960 Beam on 2 Supports: Shear Force & Bending Moment Diagrams
- WP 961 Beam on Two Supports: Shear Force Diagram
- WP 962 Beam on Two Supports: Bending Moment Diagram
- Strength of Materials
- FL 100 Strain Gauge Training System
- FL 101 Strain Gauge Application Set
- FL 102 Determining the Gauge Factor of Strain Gauges
- FL 120 Stress and Strain Analysis on a Membrane
- FL 130 Stress and Strain Analysis on a Thin-Walled Cylinder
- FL 140 Stress and Strain Analysis on a Thick-Walled Cylinder
- FL 151 Multi-Channel Measurement Amplifier
- FL 160 Unsymmetrical Bending
- FL 170 Deformation of Curved-Axis Beams
- FL 200 Photoelastic Experiments with a Transmission Polariscope
- FL 210 Photoelastic Demonstration
- SE 110.19 Investigation of Simple Stability Problems
- SE 110.20 Deformation of Frames
- SE 110.29 Torsion of Bars
- SE 110.44 Deformation of Trusses
- SE 110.47 Methods to Determine the Elastic Line
- TM 400 Hookes Law
- WP 100 Deformation of Curved-Axis Beams
- WP 120 Buckling Behaviour of Bars
- WP 121 Demonstration of Euler Buckling
- WP 130 Verification of Stress Hypotheses
- WP 950 Deformation of Straight Beams
- Dynamics
- GL 100 Gear Trains Apparatus
- GL 105 Gear Trains Model
- HM 159.11 Ship Vibration Apparatus
- KI 110 Crank and Connecting Rod Apparatus
- KI 120 Slotted Link Apparatus
- KI 130 Four Bar Chain
- KI 140 Whitworth Quick Return Apparatus
- KI 150 Hooke's Coupling Apparatus
- KI 160 Ackermann Steering Demonstrator
- SE 110.58 Experimental Set Free Vibration of a Bar
- TM 121 Wheel and Axle Apparatus
- TM 122 Wheel and Differential Axle Apparatus
- TM 123 Spur Gear Lifting Apparatus
- TM 124 Worm and Wheel Apparatus
- TM 125 Winch
- TM 140 Torsional Vibration Apparatus
- TM 150 Universal Vibration System
- TM 150.02 Free and Damped Torsional Vibrations
- TM 155 Free and Forced Vibration Apparatus
- TM 161 Compound Pendulum Apparatus
- TM 162 Bifilar / Trifilar Suspension Apparatus
- TM 163 Torsional Vibration Apparatus
- TM 164 Vibration of Spiral Spring Apparatus
- TM 170 Static and Dynamic Balancing Apparatus
- TM 180 Balance of Reciprocating Masses
- TM 182 Vibrations on Machine Foundations
- TM 182.01 Piston Compressor for TM 182
- TM 600 Centrifugal Force Apparatus
- TM 605 Coriolis Force Demonstrator
- TM 610 Inertia in Rotational Motion Apparatus
- TM 611 Rolling Disc on Inclined Plane
- TM 612 Flywheel Apparatus
- TM 620 Critical Speed Investigation Apparatus
- TM 625 Whirling Shaft Apparatus
- TM 630 Gyroscope
- TM 632 Governor Apparatus
- Fundamentals of Engineering Design
- AT 200 Apparatus for Determination of Gear Efficiency
- GL 110 Cam Mechanism
- GL 112 Cam Analysis Apparatus
- GL 200 Demonstrator for Lathe Gearing Layout
- GL 210 Geared System Apparatus
- GL 212 Two-Stage Epicyclic Gear Apparatus
- GL 300.01 Cutaway Model: Worm Gear
- GL 300.02 Cutaway Model: Mitre Gear
- GL 300.03 Cutaway Model: Spur Gear
- GL 300.04 Cutaway Model: Two-Stage Spur Gear
- GL 300.05 Cutaway Model: Planetary Gear
- GL 300.06 Cutaway Model: Variable Speed Belt Drive
- GL 300.07 Cutaway Model: Control Gear
- GL 300.08 Cutaway Model: Multiple-Disc Clutch
- GL 300.12 Cutaway Model: Pedestal Bearing
- GL 410 Gear Assembly Unit: Simple Drives
- GL 420 Gear Assembly Unit: Combined Drives
- GL 430 Gear Assembly Unit: Step and Shift Gears
- TM 220 Belt Friction Apparatus
- TM 260 Tribology Trainer Basic Module
- TM 260.01 Experimental Module Rolling / Sliding Disc
- TM 260.02 Experimental Module Optical Elastohydrodynamics
- TM 260.03 Experimental Module Pin on Disc
- TM 260.04 Experimental Module Slip / Stick & Friction Vibration
- TM 260.05 Experimental Module Block on Ring Friction
- TM 260.06 Experimental Module Journal Bearing Pressure Distribution
- TM 262 Hertzian Contact Apparatus
- TM 280 Journal Bearing Apparatus
- TM 282 Journal Bearing Friction Apparatus
- TM 290 Hydrodynamic Bearing Apparatus
- TM 310 Thread Efficiency Testing Equipment
- TM 320 Screw Tester
- Properties of Materials
- SE 100 Universal Testing Frame, 400 kN
- WP 140 Fatigue Testing Machine
- WP 300 Universal Material Tester, 20 kN
- WP 300.04 Bending Device
- WP 300.10 Device for Shearing Experiments
- WP 300.11 Device for Cupping Experiments
- WP 310 Hydraulic Universal Material Tester, 50kN
- WP 400 Pendulum Impact Tester, 25 Nm
- WP 410 Pendulum Impact Tester, 300 Nm
- WP 500 Torsion Tester, 30Nm
- WP 510 Torsion Testing Machine, 200 Nm, Motor Driven
- WP 600 Creep Testing Machine
- Statics
- Mechatronics
- Engineering Drawing
- TZ 100 Three-Dimensional Display with Geometric Models
- TZ 110 Cylindrical Work Samples with Cut-Outs Parallel to Axis
- TZ 120 Cylindrical Work Samples with Slanted Cut-Outs
- TZ 130 Prismatic Work Samples with Cut-Outs Parallel to Edges
- TZ 140 Prismatic Work Samples with Slanted Cut-Outs
- TZ 200.01 Bending Device
- TZ 200.02 Bearing Housing, Casting
- TZ 200.04 Drilling Jig for a Casting
- TZ 200.06 Drilling Jig for an Annular Disc
- TZ 200.07 Lever Shears
- TZ 200.08 Safety Catch
- TZ 200.09 Drilling Jig for Flat Part
- TZ 200.11 Bending Device Assembly Kit
- TZ 200.61 Drawing Demonstration: Drilling Jig
- TZ 200.71 Lever Shears Assembly Kit
- TZ 300 Lever Press Assembly Kit
- Dimensional Metrology
- PT 101 Dimensional Metrology I: Training Kit 1
- PT 102 Dimensional Metrology I: Training Kit 2
- PT 103 Dimensional Metrology I: Training Kit 3
- PT 104 Dimensional Metrology I: Training Kit 4
- PT 105 Dimensional Metrology I: Training Kit 5
- PT 106 Dimensional Metrology I: Training Kit 6
- PT 201 Dimensional Metrology II: Training Kit 1
- PT 202 Dimensional Metrology II: Training Kit 2
- Fasteners and Machine Parts
- MG 100 Instructional Kit: Assembly with Dowel Pins
- MG 110 Instructional Kit: Assembly with Keys
- MG 120 Instructional Kit: Assembly with Taper Keys
- MG 200 Instructional Kit: Threaded Fasteners and Lock Washers
- MG 901 Nuts and Bolts Kit
- MG 903 Screw-Locking Devices Kit
- MG 905 Thread Types Kit
- MG 911 Roller Bearings Kit
- Manufacturing Engineering
- Assembly Projects
- HL 960 Assembly Station: Pipes and Valves and Fittings
- HL 960.01 Assembly and Alignment of Pumps and Drives
- MT 110 Assembly Station: Spur Wheel / Worm Gear Mechanism
- MT 110.02 Assembly Exercise: Spur Wheel / Worm Gear Mechanism
- MT 140 Assembly Station: Piston Compressor
- MT 140.01 Assembly Exercise Piston Compressor: Functional Test
- MT 140.02 Assembly Exercise: Piston Compressor
- MT 140.20 Multimedia Learning Software: Piston Compressor
- MT 152 Assembly Exercise: Spur Gear
- MT 154 Assembly Exercise: Shut-off Valve
- MT 156 Assembly Exercise: Wedge Gate Valve and Angle Seat Valve
- MT 157 Assembly Exercise: Butterfly Valve and Non-Return Valve
- MT 158 Assembly Exercise: Ball Valve and Shut-off Valve
- MT 162 Hydraulic Valves and Fittings Test Stand
- MT 170 Assembly Exercise: Shaft with Journal Bearings
- MT 171 Assembly Exercise: Hydrodynamic Journal Bearing
- MT 172 Alignment of Drives, Shafts and Gears
- Maintenance
- HL 962 Assembly Stand for Pumps
- HL 962.01 Standard Chemicals Pump
- HL 962.02 Canned Motor Pump
- HL 962.03 Side Channel Pump
- HL 962.04 Standard Chemicals Pump with Magnetic Clutch
- MT 180 Assembly & Maintenance Exercise: Centrifugal Pump
- MT 181 Assembly & Maintenance Exercise: Multi-Stage Centrifugal Pump
- MT 182 Assembly & Maintenance Exercise: Screw Pump
- MT 183 Assembly & Maintenance Exercise: Diaphragm Pump
- MT 184 Assembly & Maintenance Exercise: Piston Pump
- MT 185 Assembly & Maintenance Exercise: In-Line Centrifugal Pump
- MT 186 Assembly & Maintenance Exercise: Gear Pump
- MT 190 Assembly Project: Materials Tester
- MT 190.01 Assembly Project: Data Acquisition for Materials Tester
- MT 210 Assembly & Maintenance Exercise: Refrigeration
- RT 395 Maintenance of Valves and Fittings and Actuators
- RT 396 Pump and Valves and Fittings Test Stand
- Machinery Diagnosis
- PT 500 Machinery Diagnostic System, Base Unit
- PT 500.04 Computerised Vibration Analyser
- PT 500.05 Brake & Load Unit
- PT 500.10 Elastic Shaft Kit
- PT 500.11 Crack Detection in Rotating Shaft Kit
- PT 500.12 Roller Bearing Faults Kit
- PT 500.13 Couplings Kit
- PT 500.14 Belt Drive Kit
- PT 500.15 Damage to Gears Kit
- PT 500.16 Crank Mechanism Kit
- PT 500.17 Cavitation in Pumps Kit
- PT 500.18 Vibrations in Fans Kit
- PT 500.19 PT 500.19 Electromechanical Vibrations Kit
- Automation
- IA 110 Calibrating a Pressure Sensor
- IA 120 Principles of Industrial Sensors
- IA 130 PLC Module
- IA 210 PLC Application: Material Handling Process
- IA 520 Computer Integrated Manufacturing and Handling System
- RT 121 Fuzzy Control: Ball-on-Beam
- RT 122 Fuzzy Control: Inverted Pendulum
- RT 123 Fuzzy Control: Ball-on-Plate
- RT 124 Fuzzy Control: Carrier Vehicle with Inverted Pendulum
- RT 700 Training System: Fundamentals of Hydraulics
- RT 701 Components Set Electrohydraulics
- RT 710 Hydraulic Servo System
- RT 770 Training System:Pneumatics, Electro-Pneumatics and PLC
- Engineering Drawing
- Thermal Engineering and HVAC
- Fundamentals of Thermodynamics
- WL 102 Change of State of Gases
- WL 201 Air Humidity Measurement
- WL 202 Fundamentals of Temperature Measurement
- WL 203 Methods of Pressure Measurement
- WL 204 Marcet Boiler
- WL 210 Flow Boiling Demonstration
- WL 220 Boiling Heat Transfer Unit
- WL 230 Condensation Unit
- WL 352 Free and Forced Convection Unit
- WL 362 Thermal Radiation Unit
- WL 372 Heat Conduction Unit
- WL 373 Heat Conduction in Gases and Liquids
- WL 374 Heat Conduction in Solids
- WL 375 Advanced Conduction Unit
- WL 376 Thermal Conductivity of Building Materials
- WL 377 Natural Convection and Radiation Apparatus
- WL 900 Heat Conduction Trainer
- WL 920 Advanced Temperature Measurement Trainer
- Applied Thermodynamics
- ET 300 Water-to-Air Heat Exchanger Trainer
- WL 110 Heat Exchanger Service Unit
- WL 110.01 Tubular Heat Exchanger
- WL 110.02 Plate Heat Exchanger
- WL 110.03 Shell & Tube Heat Exchanger
- WL 110.04 Jacketed Vessel with Stirrer & Coil
- WL 225 Fluidisation and Heat Transfer
- WL 302 Trainer Tubular Heat Exchanger
- WL 308 Heat Transfer in a Tubular Heat Exchanger
- WL 310 Cross-Flow Heat Exchanger
- WL 312 Multipurpose Air Duct and Heat Transfer Unit
- WL 314 Heat Transfer Bench
- WL 314.01 Parallel Flow Module
- WL 314.02 Mixed Flow Module
- WL 315C Heat Exchanger Trainer
- WL 320 Wet Cooling Tower
- WL 320.01 Cooling Column, Type 2
- WL 320.02 Cooling Column, Type 3
- WL 320.03 Cooling Column, Type 4
- WL 320.04 Cooling Column, Type 5
- Renewable Energies
- Power Engines and Machines
- ET 500 Two-Stage Piston Compressor
- ET 508 Simulation of a Two-Stage Air Compressor
- ET 512 Air Compressor Test Unit
- ET 513 Single-Stage Compressor
- ET 792 Gas Turbine
- ET 794 Gas Turbine with Power Turbine
- ET 795 Simulation of a Gas Turbine
- ET 796 Gas Turbine Jet Engine
- ET 805 Steam Power Plant 20kW with Process Control System
- ET 805.50 Throttling Calorimeter
- ET 810 Single-Cylinder Steam Engine
- ET 813 Two-Cylinder Steam Engine
- ET 830 Steam Power Plant
- ET 830.01 Cooling Tower
- ET 833 Steam Power Plant 1,5kW with Process Control System
- ET 833.01 Cooling Tower
- ET 850 Steam Generator Module
- ET 851 Steam Turbine Module
- ET 860 Steam Boiler Safety & Control
- Internal Combustion Engines
- CT 100.11 Exhaust Gas Calorimeter for CT 110
- CT 100.13 Electronic Engine Indicating System for CT 110
- CT 100.20 Four-Stroke Petrol Engine for CT 110
- CT 100.21 Two-Stroke Petrol Engine for CT 110
- CT 100.22 Four-Stroke Diesel Engine for CT 110
- CT 100.23 Water-Cooled Four-Stroke Diesel Engine for CT 110
- CT 110 Test Stand for Single Cylinder Engines, 7,5kW
- CT 150 Four-Stroke Petrol Engine for CT 159
- CT 151 Four-Stroke Diesel Engine for CT 159
- CT 152 Four-Stroke Petrol Engine with Variable Compression for CT 159
- CT 153 Two-Stroke Petrol Engine for CT 159
- CT 159 Modular Test Stand for Single Cylinder Engines, 2.2kW
- CT 159.01 Electronic Engine Indicating System for CT 159
- CT 159.02 Exhaust Gas Analysing Unit
- CT 300 Engine Test Stand, 11kW
- CT 300.03 Single Cylinder Engine with Variable Compression for CT 300
- CT 300.09 Electronic Engine Indicating System for CT 300
- CT 400 Load Unit, 75kW, for 4-Cylinder Engines
- CT 400.01 4-Cylinder Petrol Engine
- CT 400.02 4-Cylinder Diesel Engine
- CT 400.09 Electronic Engine Indicating System for CT 400
- Refrigeration and Air Conditioning Technology
- ET 101 Simple Compression Refrigeration Circuit
- ET 102 Heat Pump Trainer
- ET 120 Cooling Using the Peltier Effect
- ET 122 Vortex Cooling Device
- ET 144 Electrical Installation in Refrigeration Systems
- ET 150.01 Refrigerant Filling and Evacuation Equipment
- ET 150.02 Tool Set
- ET 165 Refrigeration System with Open Compressor
- ET 170 Electrical Faults in Simple Air Conditioning Systems
- ET 171 Electrical Connection of Refrigerant Compressors
- ET 172 Electrical Faults in Refrigerant Compressors
- ET 174 Electrical Faults in Full Air Conditioning Systems
- ET 180 Pressure Switches in Refrigeration
- ET 181 Adjustment and Operation of Expansion Valves
- ET 192 Replacement of Refrigeration Components
- ET 340 Building Automation in Heating and Air Conditioning Systems
- ET 350 Changes of State in the Refrigeration Circuit
- ET 351C Thermodynamics of the Refrigeration Circuit
- ET 352 Steam Jet Compressor in Refrigeration Engineering
- ET 400 Refrigeration Circuit with Variable Load
- ET 405 Heat Pump for Cooling and Heating Operation
- ET 411C Compression Refrigeration System
- ET 412C Refrigeration System with Refrigeration and Freezing Chamber
- ET 420 Ice Stores in Refrigeration
- ET 422 Capacity Control and Faults in Refrigeration Systems
- ET 426 Capacity Control in Refrigeration Systems
- ET 428 Energy Efficiency in Refrigeration Systems
- ET 430 Refrigeration System withTwo-Stage Compression
- ET 431 Heat Exchangers in the Refrigeration Circuit
- ET 432 Behaviour of a Piston Compressor
- ET 441 Refrigeration Chamber and Defrosting Methods
- ET 450 Vehicle Air Conditioning
- ET 480 Absorption Refrigeration System
- ET 499.01 Cutaway Model: Hermetic Refrigerant Compressor
- ET 499.30 Cutaway Model: Ceiling Air Cooler
- ET 600 Conditioning of Room Air
- ET 605 Air Conditioning System Model
- ET 611 Air Conditioning System with Chamber
- ET 620 Air Conditioning and Ventilation System
- ET 630 Split System Air Conditioner
- ET 900 Introduction to Refrigeration
- ET 910 Refrigeration Training System, Base Unit
- ET 910.10 Refrigeration Components for Basic Experiments
- ET 910.11 Refrigeration Components for Advanced Experiments
- ET 915 HSI Training System Refrigeration and Air Conditioning Technology, Base Unit
- ET 915.01 Refrigerator Model
- ET 915.02 Model of a Refrigeration System with Refrigeration and Freezing Stage
- ET 915.06 Model of a Simple Air Conditioning System
- ET 915.07 Air Conditioning Model
- ET 930 Evaporator Control with Electronic Expansion Valve
- Heating and Ventilation in Buildings
- HL 101 Thermal Expansion Training Panel
- HL 102 Pipe Friction Training Panel
- HL 103 Fitting Loss Training Panel
- HL 104 Temperature Measurement Training Panel
- HL 105 Three-Way Mixing Valve Training Panel
- HL 106 Four-Way Mixing Valve Training Panel
- HL 107 Circulating Pumps Training Panel
- HL 108 Domestic Heating Circuit Training Panel
- HL 109 Safety Devices Training Panel
- HL 110 Expansion Vessel Training Panel
- HL 111 Fluid Friction Training Panel
- HL 112 Radiator Training Panel
- HL 113 Losses in Valves and Fittings Training Panel
- HL 210 Losses in Pipe Systems and Fittings
- HL 300 Central Heating System
- HL 305 Hydronic Balancing of Radiators
- HL 350 Oil Burner Demonstrator
- HL 351 Domestic Heating Boiler
- HL 352 Domestic Water Heating System
- HL 353 Hot Water Generator
- HL 353.01 Comparison of Different Heating Types
- HL 353.02 Heat Distribution and Control in Heating Systems
- HL 356 Demo Unit, Gas Burner
- HL 358 Forced Air Gas Burner Training Panel
- HL 360 Oil Tank Safety Trainer
- HL 392C Safety & Control in Heating Systems
- HL 500 Instantaneous Gas Heater
- HL 510 Domestic Gas Supply Training Panel
- HL 530 Training Panel Function of Gas Heater
- HL 620 Domestic Heating System Control Training Panel
- HL 630 Efficiency in Heating Technology
- HL 710 Air Duct Systems
- HL 720 Ventilation System
- HL 722 Control Unit for Ventilation System
- HL 860 Exhaust Gas Analyser
- Sanitary Systems
- Fundamentals of Thermodynamics
- Fluid Mechanics and Hydrology
- Fundamentals of Fluid Mechanics
- HM 115 Properties of Fluids & Hydrostatics Bench
- HM 135 Drag Coefficients for Spheres
- HM 150 Base Module for Experiments in Fluid Mechanics
- HM 150.01 Pipe Friction Apparatus
- HM 150.02 Dead-Weight Piston Gauge
- HM 150.03 Flow Over Weirs Accessory
- HM 150.04 Variable Speed Centrifugal Pump
- HM 150.05 Hydrostatic Pressure Apparatus
- HM 150.06 Stability of Floating Bodies
- HM 150.07 Bernoulli's Principle Demonstrator
- HM 150.08 Impact of Jet Apparatus
- HM 150.09 Orifice and Jet Velocity Apparatus
- HM 150.10 Flow Visualisation Apparatus
- HM 150.11 Fluid Friction Apparatus
- HM 150.12 Orifice Discharge Apparatus
- HM 150.13 Methods of Flow Measurement
- HM 150.14 Impeller Vortex Apparatus
- HM 150.16 Twin Centrifugal Pump Configurations
- HM 150.18 Osborne Reynolds Demonstrator
- HM 150.19 Operating Principle of a Pelton Turbine
- HM 150.20 Operating Principle of a Francis Turbine
- HM 150.21 Flow Channel
- HM 150.29 Losses in Bends and Fittings
- HM 150.39 Stability of a Floating Body, Additional Bodies
- HM 164 Flume for Open and Closed Flow
- Steady Incompressible Flow
- HM 111 Pipe Network Bench
- HM 112 Hydrodynamics Trainer / PC
- HM 120 Pipe Fitting Loss Demo Panel
- HM 122 Pressure Loss in Pipes
- HM 220 Airflow Study Unit
- HM 220.01 Venturi Tube
- HM 220.02 Boundary Layer Flow
- HM 225 Aerodynamics Trainer
- HM 225.03 Bernoulli's Equation Apparatus
- HM 225.05 Flow Around a Bend
- HM 225.07 Round Turbulent Jet Apparatus
- HM 240 Principles of Airflow
- HM 240.03 Electronic Pitot Sensor
- HM 240.04 Cylinder Pressure Distribution
- HM 240.05 Pipe Fittings
- HM 240.06 Heat Transfer
- HM 241 Principles of Hydraulics
- HM 500 Flow Meter Trainer
- HM 500.04 Electromagnetic Flow Meter
- HM 500.10 Paddle Wheel Flow Meter
- HM 500.13 Orifice Plate Flow Meter with Transducer
- RT 390 Test Stand for Control Valves
- Flow around Bodies
- HM 133 Visualisation of Flow Fields
- HM 136 Flow through Packed Columns
- HM 152 Potential Flow
- HM 153 Visualisation of Different Flows
- HM 170 Open Wind Tunnel
- HM 170.20 Aerofoil, Spring-Mounted
- HM 170.28 Wake Measurement
- HM 225.02 Boundary Layers
- HM 225.04 Drag Forces
- HM 225.06 Coanda Effect
- HM 225.08 Visualisation of Streamlines
- HM 226 Wind Tunnel for Visualisation of Streamlines
- Steady Flow of Compressible Fluids
- Examples of Transient Flow
- Hydraulic Fluid Energy Machines
- HM 210 Characteristic Variables of a Radial Fan
- HM 215 Two-Stage Axial - Flow Fan
- HM 270 Air-Operated Impulse Turbine
- HM 272 Air-Operated Reaction Turbine
- HM 280 Experiments with a Radial Fan
- HM 282 Experiments with an Axial Fan
- HM 283 Experiments with a Centrifugal Pump
- HM 284 Series and Parallel Connected Pumps
- HM 285 Experiments with a Piston Pump
- HM 286 Experiments with a Gear Pump
- HM 287 Experiments with an Axial Turbine
- HM 288 Radial-Flow Reaction Turbine Demonstrator
- HM 289 Pelton Turbine Demonstrator
- HM 290 Turbine Demonstrator Supply Module
- HM 291 Axial-Flow Impulse Turbine Demonstrator
- HM 292 Centrifugal Compressor Demonstrator
- HM 299 Pump and Compressor Unit
- HM 300 Basic Centrifugal Pump
- HM 305 Industrial Centrifugal Pump
- HM 332 Series / Parallel Pumps / PC
- HM 362 Comparison of Pumps
- HM 365 Universal Drive and Brake Unit
- HM 365.10 Water Pump Supply Module
- HM 365.11 Centrifugal Pump Module
- HM 365.14 Series / Parallel Pumps Module
- HM 365.15 Side Channel Pump Module
- HM 365.17 Piston Pump Module
- HM 365.20 Oil Pump Supply Module
- HM 365.31 Pelton and Francis Turbine
- HM 365.32 Turbine Supply Unit
- HM 365.45 Axial-Flow Pump Module
- HM 405 Axial-Flow Turbomachines
- HM 421 Kaplan Turbine Trainer
- HM 430C Francis Turbine Trainer
- HM 450.01 Pelton Turbine
- HM 450.02 Francis Turbine
- HM 450C Characteristic Variables of Hydraulic Turbomachines
- Components in Piping Systems and Plant Design
- HM 700.01 Cutaway Model: Standard Orifice Plate
- HM 700.02 Cutaway Model: Flow Nozzle
- HM 700.03 Cutaway Model: Standard Venturi Meter
- HM 700.04 Cutaway Model: Straight-Way Valve
- HM 700.05 Cutaway Model: Corner Valve
- HM 700.06 Cutaway Model: Angle Seat Valve
- HM 700.07 Cutaway Model: Non-Return Valve
- HM 700.08 Cutaway Model: Pressure Reducing Valve
- HM 700.09 Cutaway Model: Strainer
- HM 700.10 Cutaway Model: Gate Valve
- HM 700.11 Cutaway Model: Straight-Way Plug Valve
- HM 700.12 Cutaway Model: 3-Way Plug Valve
- HM 700.13 Cutaway Model: Ball Valve
- HM 700.14 Cutaway Model: Safety Valve
- HM 700.15 Cutaway Models: Various Screwed Pipe Connections
- HM 700.16 Cutaway Models: Pressure Gauges
- HM 700.17 Cutaway Model: Centrifugal Pump
- HM 700.20 Cutaway Model: Piston Pump
- HM 700.22 Cutaway Model: Gear Pump
- VS 101 Cutaway Model: Underground Hydrant
- VS 102 Cutaway Model: Resilient Seated Gate Valve
- VS 103 Cutaway Model: Screw Down Valve
- VS 104 Cutaway Model: Changeover Valve
- VS 105 Cutaway Model: Gas Meter
- VS 106 Cutaway Model: Backflow Preventer
- VS 107 Cutaway Model: Non-Return Butterfly Valve
- VS 108 Cutaway Model: Water Meter
- VS 109 Cutaway Model: Strainer
- Hydraulics for Civil and Environmental Engineering
- Fundamentals of Fluid Mechanics
- Process Engineering
- Fundamentals of Control Engineering
- Components and Calibration
- Simple Process Engineering Control Systems
- RT 450 Process Automation Training System: Base Module
- RT 450.01 Controlled System Module: Level
- RT 450.02 Controlled System Module: Flow
- RT 450.03 Controlled System Module: Pressure
- RT 450.04 Controlled SystemModule: Temperature
- RT 450.40 Visualisation Software
- RT 512 Level Control Trainer
- RT 522 Flow Control Trainer
- RT 532 Pressure Control Trainer
- RT 542 Temperature Control Trainer
- RT 552 pH-Value Control Trainer
- RT 614 Level Control Demonstration Unit
- RT 624 Flow Control Demonstration Unit
- RT 634 Pressure Control Demonstration Unit
- RT 644 Temperature Control Demonstration Unit
- RT 650.40 I&C Software for RT 614 - RT 674 Series
- RT 650.50 Process Control Software for RT 512 - RT 552 Series
- RT 674 Flow / Level Control Demonstration Unit
- Complex Process Engineering Control Systems
- RT 578 Control of 4 Variables from Process Engineering
- RT 580 Fault Finding in Control Systems
- RT 586 Control of Water Quality
- RT 590 Process Control Engineering Experimentation Plant
- RT 681 Multivariable Control: Vacuum Degassing
- RT 682 Multivariable Control: Stirred Tank
- RT 800 PLC Application: Mixing Process
- Fundamentals of Process Engineering
- Mechanical Process Engineering
- CE 110 Diffusion in Liquids and Gases
- CE 115 Fundamentals of Sedimentation
- CE 116 Cake and Depth Filtration
- CE 117 Flow through Particle Layers
- CE 200 Flow Properties of Bulk Solids
- CE 210 Flow of Bulk Solids from Silos
- CE 220 Fluidised Bed Formation
- CE 225 Hydrocyclone
- CE 235 Gas Cyclone
- CE 245 Ball Mill
- CE 250 Pneumatic Transport
- CE 255 Rolling Agglomeration
- CE 275 Gas Flow Classification
- CE 280 Magnetic Separation
- CE 283 Drum Cell Filter
- CE 284 Nutsche Vacuum Filter
- CE 285 Suspension Production Unit
- CE 286 Nutsche Pressure Filter
- CE 287 Plate and Frame Filter Press
- CE 320 Stirring
- Chemical Process Engineering
- Thermal Process Engineering
- Biological Process Engineering
- Water Treatment
- CE 300 Ion Exchange
- CE 530 Reverse Osmosis
- CE 579 Depth Filtration
- CE 581 Water Treatment Plant 1
- CE 582 Water Treatment Plant 2
- CE 583 Adsorption
- CE 584 Advanced Oxidation
- CE 586 Precipitation and Flocculation
- CE 587 Dissolved Air Flotation
- CE 701 Biofilm Process
- CE 702 Anaerobic Water Treatment
- CE 705 Activated Sludge Process
- Engineering Mechanics and Machine Elements
- K AND H Products
- Instrumentation
- Gwinstek
- Oscilloscopes
- Spectrum Analyzers
- Signal Sources
- Power Supplies
- Basic T & M
- Accessories
- Test Leads / Cables / Probes
- GCP-201
- GCP-206P/425P
- GCP-530/1030
- GDP-025/GDP-050
- GDP-100
- GHT-105
- GHT-107A
- GHT-108
- GHT-109
- GHT-110
- GHT-113
- GHT-205
- GTL-101
- GTL-103
- GTL-104
- GTL-105A
- GTL-107A
- GTL-108A
- GTL-110
- GTL-115
- GTL-117
- GTL-161
- GTL-201A
- GTL-202
- GTL-203
- GTL-204
- GTL-232
- GTL-232A
- GTL-242
- GTL-246
- GTL-247
- GTL-301
- GTL-302
- GTL-303
- GTL-304
- GTL-401
- GTP-020A-4
- GTP-060A-2
- GTP-060A-4
- GTP-100A-4
- GTP-150A-2
- GTP-250A-2
- GTP-3000
- PT-100
- Adaptors
- LCR Fixtures
- Cases / Bags / Racks
- Special Applications
- Test Leads / Cables / Probes
- Metrel
- Electrical Installations Safety
- Multifunction Testers (Eurotest Family)
- MI 2086 Eurotest 61557
- MI 2087 Instaltest 61557
- MI 2088 Earth Insulation Tester
- MI 2093 Line Tracer
- MI 2150 Installcheck
- MI 3100 Eurotest EASI
- MI 3101 Eurotest AT
- MI 3102 Eurotest XE
- MI 3102H CL EurotestXE 2.5 kV
- MI 3105 Eurotest XA
- MI 3108 Eurotest PV
- MI 3109 Eurotest PV Lite
- MI 3125 Eurotest COMBO
- MI 3125B Eurotest COMBO
- Singlefunction Testers (Smartec Family)
- Demonstration Board
- Multifunction Testers (Eurotest Family)
- Power Quality Analysis
- High Voltage Insulation Diagnostics
- Machines / Appliances / Switchgear Safety
- Lan Cabling Certification
- Indoor Environment Quality
- Digital multimeters/ Current clamps/ Voltage Teste
- Equipment for Laboratories and Schools
- Transformers
- Electrical Installations Safety
- Fluke
- Clamp Meter
- Clamp Meter
- Fluke 360 AC Leakage Current Clamp Meter
- Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter
- Fluke 373 True-rms AC Clamp Meter
- Fluke 374 True-rms AC/DC Clamp Meter
- Fluke 375 True-rms AC/DC Clamp Meter
- Fluke 376 True-rms AC/DC Clamp Meter with iFlex
- Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex
- Fluke 771 Milliamp Process Clamp Meter
- Fluke 772 Milliamp Clamp Meters
- Fluke 773 Milliamp Process Clamp Meter
- HVAC Combo Kit
- Power Quality Clamp Meter
- True-rms 2000 A Clamp Meters
- True-rms HVAC Clamp Meter
- Digital Multimeter
- Fluke 113 Utility Multimeter
- Fluke 114 Digital Multimeter
- Fluke 115 Digital Multimeter
- Fluke 116 : Digital Multimeters
- Fluke 117 Digital Multimeter: The choice for commercial applications
- Fluke 1587/1577 : Insulation Multimeters
- Fluke 170 Series Digital Multimeters
- Fluke 27II / 28 II
- Fluke 289 : Industrial Logging Multimeter with TrendCapture
- Fluke 77-IV : Digital Multimeter
- Fluke 787 : Process Meter
- Fluke 789 : Process Meter
- Fluke 80 Series V Digital Multimeters: The Industrial Standard
- Fluke 88v : Deluxe Automotive Multimeter
- Handheld Multimeter: Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture
- Industrial Multimeters: Fluke 87V Ex Intrinsically Safe True RMS Multimeter
- Earth Ground
- Power Quality Tools
- Disturbance Analyzer: Fluke 1740 Series Three-Phase Power Quality Loggers
- Fluke 1735 : Power Logger
- Fluke 1760 : Three-Phase Power Quality Recorder
- Fluke 434 : PWR Power Analyzer
- Fluke Norma : High Precision Power Analyzers
- Power Quality Analysis: Fluke 430 Series Three-Phase Power Analyzer
- Power Quality Recorder
- Process Calibration Tools
- Fluke 705 : Loop Calibrator
- Fluke 707 Loop Calibrator
- Fluke 707Ex : Intrinsically safe loop calibrator
- Fluke 712 RTD
- Fluke 714 Thermocouple Calibrator
- Fluke 715 Volt/ mA Calibrator
- Fluke 717 : Pressure Calibrators
- Fluke 718 : Pressure Calibrator
- Fluke 718Ex : Pressure Calibrator
- Fluke 719 : Electric Pressure Calibrator
- Fluke 724 Temperature Calibrator
- Fluke 725 : Multifunction Process Calibrator
- Fluke 726 : Precision Multifunction Process Calibrator
- Fluke 743B : Documenting Process Calibrator
- Fluke 744 : Documenting Process Calibrator
- Fluke NEW 753 Documenting Process Calibrator
- Fluke NEW 754 Documenting Process Calibrator-HART
- Industrial Multimeters: Fluke 87V Ex Intrinsically Safe True RMS Multimeter (2)
- The 741B : Documenting Process Calibrator
- Thermometers
- Contact Thermometer: Fluke 561 Infrared and Contact Thermometer
- Fluke 116/322 HVAC Combo Kit - Includes Multimeter and Clampmeter
- Fluke 170 Series Digital Multimeters (2)
- Fluke 179/EDA2 Combo Kit Includes Meter and Deluxe Accessories
- Fluke 50 Series II Thermometers
- Fluke 572 Precision Infrared Thermometer
- Fluke 574 Precision Infrared Thermometer
- Fluke 62 Mini Infrared Thermometer, Infrared Thermometer Gun
- Fluke 62/322/1AC II IR Thermometer, Clamp Meter and Voltage Detector Kit
- Fluke 80 Series V Digital Multimeters: The Industrial Standard (2)
- Fluke FoodPro Plus Food Safety Thermometer
- Fluke FoodPro Thermometer
- Infrared and Contact Thermometers: Fluke 568 and 566
- Portable Thermometers: Fluke 60 Series Handheld Infrared Thermometers
- Thermometers, Fluke T5-600/62/1AC II IR Thermometers, Electrical Tester and Voltage Detector Kit
- HVAC IAQ Tools
- Clamp Meter
- Ideal
- Transmille
- Leap
- Aitelong
- Graphtec
- Gwinstek
MTS-86C 8086 Microcomputer Trainer

Education / K AND H Products / Microcomputer Control System /
featured
- To provide examples of hardware / software trade-off
- To show how programs should be designed, debugged
- We have illustrated this control with the simplest possible examples using switches, single displays and the onboard peripherals.
description
MTS-86C can perform the experiment without additional peripherals. It uses a popular microprocessor with adequate documentation. MTS-86C is easy to assemble that includes a prototyping area and expansion facilities, and provides all the typical components of microprocessor system.