Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
HM 365.10 Water Pump Supply Module
Education / GUNT Hamburg / Fluid Mechanics and Hydrology / Hydraulic Fluid Energy Machines /


 The Basic Module Water Pumps is part of an equipment series that facilitates the investigation of a wide range of engines and machines. Different water pumps can be operated on the basic module and investigated in respect of their characteristic behaviour. The pumps are installed in the experimental set-up using flexible hoses with rapid action couplings. The flow rate is set on a ball-cock and acquired with a magneto-inductive flowmeter. The sensors for intake and delivery pressure are fitted to the pumps to be investigated. All sensors are connected to the measuring unit that is part of the basic module. The measured values recorded are displayed on digital displays on this block. The drive motor for the pump drive is fitted to the HM 365 Universal Drive and Brake Unit.

Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and a pump, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic curve and the operating point of the pump
· Checking of the necessary NPSH value of the pump
[1] Basic module for the operation of water pumps
[2] Experimental set-up on laboratory trolley
[3] Copper piping with ball-cock and magneto-inductive flowmeter 25m³/h
[4] Connection to the pumps via flexible hoses with rapid action couplings
[5] Supply tank made of plastic, 96Ltr
[6] Measuring unit block for the connection of the electronic sensors
[7] Digital display of the measured values and relaying to PC data acquisition
[8] 230V,~50Hz, connected via HM 365 Universal Drive and Brake Unit
Technical Data
Measuring range
Measurement intake pressure: -1...+1bar
Measurement delivery pressure: 0...6bar
Temperature measurement: 0...100°C
Measurement of flow rate: 0...25m3/h

Supply tank
Capacity 96Ltr
Dimensions and Weight
l x w x h: 1200 x 800 x 1150 mm
Weight : approx. 80 kg
Required for Operation
230V,~50Hz connected via the HM 365 Universal Drive and Brake Unit
Scope of Delivery
1 basic module with measuring unit block, 
2 connecting hoses, 1 instruction manual
Order Details
070.36510 HM 365.10 Water Pump Supply Module