Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
PRODUCT
HM 290 Turbine Demonstrator Supply Module
Education / GUNT Hamburg / Fluid Mechanics and Hydrology / Hydraulic Fluid Energy Machines /
description

DATA SHEET UNDER REVISION!

The HM 290 supplies the turbine models HM 288, HM 289 and HM 291 with water. It consists of a supply tank, pump and pipe work; these are mounted in clear layout on a base plate. The turbine models are placed on the supply tank and bolted in place. A hose provides the connection for the pressure line to the turbine model. After flowing through the turbine, the water flows directly into the supply tank. The flow rate and the pressure present at the turbine can be adjusted using a control valve. Electronic sensors measure the flow rate and supply pressure. The following accessories are required for operation: an Interface Module (HM 280.01), Data Acquisition Card + Software (HM 280.03) and Connecting Cables (HM 280.04). These accessories enable to process and store the measured data on PC.

 
Learning Objectives / Experiments
If the HM 288, 289 or 291 turbine models is used, the following can be performed:

· Determination of typical turbine curves
· Performance curves at varying turbine speeds
· Determination of efficiencies 
Specification
[1] Turbine service unit
[2] Tank and pipework made of corrosion-resistant materials
[3] lxwxh 850x450x550mm, 40kg
[4] Electronic sensor for flow rate measurement, measuring range 0...100Ltr/min
[5] Electronic sensor for pressure measurement, measuring range 0...10bar
[6] Flow rate can be adjusted using regulator valve
Technical Data
Pump 0.6kW, 230V, ~50Hz
Qmax: 64Ltr/min, max. head: 60m
Measuring range for flow rate measurement: 0...100Ltr/min
Measuring range for pressure measurement: 0...10bar
Dimensions and Weight
lxwxh : 850 x 450 x 550 mm
Empty weight : 40 kg
Scope of Delivery
1 module, completely assembled, 1 instruction manual
Order Details
070.29000 HM 290 Turbine Demonstrator Supply Unit