Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
PRODUCT
HL 962 Assembly Stand for Pumps
Education / GUNT Hamburg / Mechatronics / Maintenance /
description

Exchanging pumps for inspection or repair is a key element of a maintenance engineer's work.

  With HL 962, trainee maintenance engineers can be instructed in the practical tasks involved in exchanging different pumps. To this end, the stand features a three-phase electric motor as its drive and an intake and delivery line with manometers. Four different pumps are available as add-on machines. The position of the electric motor can be adjusted in three directions for alignment purposes. The alignment can be checked using a straight-edge or two dial gauges. The potentiometer-adjustable speed and the power output of the electric motor are displayed digitally on the switch cabinet.

  The stand forms a closed water circuit in conjunction with a pump and the central water supply (tank system HL 962.30 + piping system HL 962.32). The characteristic curves for the pumps can be obtained using this set-up. The accessory pumps HL 962.01, HL 962.02, HL 962.03 or HL 962.04 are typical centrifugal pumps, widely used in process engineering.

 

Learning Objectives / Experiments
In conjunction with an accessory pump (standard chemicals pump HL 962.01, canned motor pump HL 962.02, side channel pump HL 962.03, standard chemicals pump with magnetic clutch HL 962.04) and a suitable water supply, e.g. HL 962.30 with HL 962.32 
- mounting of the pump and alignment of the electric 
  motor
- familiarisation with various methods of aligning the
  motor and pump
- commissioning and leak testing
- recording a pump characteristic 
- comparison of various pump types (only if multiple pumps are available) 
Specification

[1] stand for mounting of various pumps
[2] asynchronous motor with frequency converter for speed control
[3] electric motor with positioning frame and fit plates for alignment
[4] base plate prepared for mounting of various pumps
[5] alignment of motor and pump with straight-edge or by dial gauges
[6] switch cabinet with speed adjuster and digital display of speed and power output
[7] frame with adjustable feet for levelling
[8] PVC piping

[9] water supply from tank system HL 962.30 
[10] the system forms part of the GUNT assembly, maintenance and repair practice line

 

Technical Data

Three-phase AC asynchronous motor

- power output: 4kW, speed range: 0...1.450min-1 

 

Connecting flanges for water supply

- intake side: DN 50

- delivery side: DN 50

- intake side channel pump: DN 32

Fit plates as motor chocks

- 43x43mm

- 4 different thicknesses: 0,1-0,2-0,5-1,0mm,

  20 of each

Measuring ranges

- intake pressure manometer: -1...1bar

- delivery pressure manometer: 0...16bar

- rotameter: 0...11m³/h

- speed: 0...3.000min-1

- power meter: 0...4kW

- dial gauge: 0...3mm, resolution: 0,01mm

 

Dimensions and Weight
LxWxH: 1.310x720x1.640mm
Weight: approx. 180kg
Required for Operation
400V, 50/60Hz, 3 phase
Scope of Delivery

1 assembly stand, completely assembled
1 set of tools (1x soft-faced hammer, 1 set of Allen

   keys, size 2...8, 6 combination spanners, size: 2x17,

   2x19, 2x24)
1 set of measuring aids: 2 dial gauges with

   attachment, 1 straight-edge
80 fit plates, differing thicknesses
1 instruction manual

Order Details
065.96200  HL 962  Assembly Stand for Pumps