PRODUCT
- Education
- K AND H Products
- Automatic Control System
- Autotronics System
- Biomedical Measurement System
- Communication System
- Data Communication and Networking
- Electrical Machine Power Electronics
- Electronic Trainer Equipment Breadboard Accessor
- DL-400 Logic Trainer
- DT-01 Digital Trainer
- ETS-5000 Advanced Digital Training System
- ETS-7000 Digital-Analog Training System
- IC Tool
- IDL-600 Analog Lab
- IDL-800 Digital Lab
- LT-1000 Digital Learners Teacher
- OLS-1000 Analog Overlay Learning System
- OLS-2000 Digital Overlay Learning System
- PP-272/PBU-312 Power Project Board/Circuit Lab
- Test Leads & Accessories
- Electronics Circuits System
- Green Energy System
- Industrial Control System
- Microcomputer Control System
- Refrigeration & Air Condition System
- Testing Instrument
- GUNT Hamburg
- Engineering Mechanics and Machine Elements
- Statics
- EM 049 Equilibrium of Moments on a Two-Arm Lever
- FL 111 Forces in a Simple Bar Structure
- SE 110.12 Lines of Influence on the Gerber Beam
- SE 110.16 Parabolic Arch
- SE 110.17 Three-Hinged Arch
- SE 110.18 Forces on a Suspension Bridge
- SE 110.21 Forces in Various Single Plane Trusses
- SE 110.22 Forces in an Overdeterminate Truss
- SE 110.50 Cable under Dead-Weight
- SE 110.53 Equilibrium in a Single Plane, Statically Determinate System
- SE 112 Mounting Frame
- SE 130 Forces in a Howe Truss
- SE 130.01 Truss Beam: Warren Girder
- TM 110 Fundamentals of Statics
- TM 110.01 Supplementary Set - Inclined Plane and Friction
- TM 110.02 Supplementary Set - Pulley Blocks
- TM 110.03 Supplementary Set - Gear Wheels
- TM 115 Forces in a Crane Jib
- TM 200 Fundamentals of Mechanical Friction
- TM 210 Dry Friction
- TM 225 Friction on the Inclined Plane
- TM 232 Bearing Friction
- WP 960 Beam on 2 Supports: Shear Force & Bending Moment Diagrams
- WP 961 Beam on Two Supports: Shear Force Diagram
- WP 962 Beam on Two Supports: Bending Moment Diagram
- Strength of Materials
- FL 100 Strain Gauge Training System
- FL 101 Strain Gauge Application Set
- FL 102 Determining the Gauge Factor of Strain Gauges
- FL 120 Stress and Strain Analysis on a Membrane
- FL 130 Stress and Strain Analysis on a Thin-Walled Cylinder
- FL 140 Stress and Strain Analysis on a Thick-Walled Cylinder
- FL 151 Multi-Channel Measurement Amplifier
- FL 160 Unsymmetrical Bending
- FL 170 Deformation of Curved-Axis Beams
- FL 200 Photoelastic Experiments with a Transmission Polariscope
- FL 210 Photoelastic Demonstration
- SE 110.19 Investigation of Simple Stability Problems
- SE 110.20 Deformation of Frames
- SE 110.29 Torsion of Bars
- SE 110.44 Deformation of Trusses
- SE 110.47 Methods to Determine the Elastic Line
- TM 400 Hookes Law
- WP 100 Deformation of Curved-Axis Beams
- WP 120 Buckling Behaviour of Bars
- WP 121 Demonstration of Euler Buckling
- WP 130 Verification of Stress Hypotheses
- WP 950 Deformation of Straight Beams
- Dynamics
- GL 100 Gear Trains Apparatus
- GL 105 Gear Trains Model
- HM 159.11 Ship Vibration Apparatus
- KI 110 Crank and Connecting Rod Apparatus
- KI 120 Slotted Link Apparatus
- KI 130 Four Bar Chain
- KI 140 Whitworth Quick Return Apparatus
- KI 150 Hooke's Coupling Apparatus
- KI 160 Ackermann Steering Demonstrator
- SE 110.58 Experimental Set Free Vibration of a Bar
- TM 121 Wheel and Axle Apparatus
- TM 122 Wheel and Differential Axle Apparatus
- TM 123 Spur Gear Lifting Apparatus
- TM 124 Worm and Wheel Apparatus
- TM 125 Winch
- TM 140 Torsional Vibration Apparatus
- TM 150 Universal Vibration System
- TM 150.02 Free and Damped Torsional Vibrations
- TM 155 Free and Forced Vibration Apparatus
- TM 161 Compound Pendulum Apparatus
- TM 162 Bifilar / Trifilar Suspension Apparatus
- TM 163 Torsional Vibration Apparatus
- TM 164 Vibration of Spiral Spring Apparatus
- TM 170 Static and Dynamic Balancing Apparatus
- TM 180 Balance of Reciprocating Masses
- TM 182 Vibrations on Machine Foundations
- TM 182.01 Piston Compressor for TM 182
- TM 600 Centrifugal Force Apparatus
- TM 605 Coriolis Force Demonstrator
- TM 610 Inertia in Rotational Motion Apparatus
- TM 611 Rolling Disc on Inclined Plane
- TM 612 Flywheel Apparatus
- TM 620 Critical Speed Investigation Apparatus
- TM 625 Whirling Shaft Apparatus
- TM 630 Gyroscope
- TM 632 Governor Apparatus
- Fundamentals of Engineering Design
- AT 200 Apparatus for Determination of Gear Efficiency
- GL 110 Cam Mechanism
- GL 112 Cam Analysis Apparatus
- GL 200 Demonstrator for Lathe Gearing Layout
- GL 210 Geared System Apparatus
- GL 212 Two-Stage Epicyclic Gear Apparatus
- GL 300.01 Cutaway Model: Worm Gear
- GL 300.02 Cutaway Model: Mitre Gear
- GL 300.03 Cutaway Model: Spur Gear
- GL 300.04 Cutaway Model: Two-Stage Spur Gear
- GL 300.05 Cutaway Model: Planetary Gear
- GL 300.06 Cutaway Model: Variable Speed Belt Drive
- GL 300.07 Cutaway Model: Control Gear
- GL 300.08 Cutaway Model: Multiple-Disc Clutch
- GL 300.12 Cutaway Model: Pedestal Bearing
- GL 410 Gear Assembly Unit: Simple Drives
- GL 420 Gear Assembly Unit: Combined Drives
- GL 430 Gear Assembly Unit: Step and Shift Gears
- TM 220 Belt Friction Apparatus
- TM 260 Tribology Trainer Basic Module
- TM 260.01 Experimental Module Rolling / Sliding Disc
- TM 260.02 Experimental Module Optical Elastohydrodynamics
- TM 260.03 Experimental Module Pin on Disc
- TM 260.04 Experimental Module Slip / Stick & Friction Vibration
- TM 260.05 Experimental Module Block on Ring Friction
- TM 260.06 Experimental Module Journal Bearing Pressure Distribution
- TM 262 Hertzian Contact Apparatus
- TM 280 Journal Bearing Apparatus
- TM 282 Journal Bearing Friction Apparatus
- TM 290 Hydrodynamic Bearing Apparatus
- TM 310 Thread Efficiency Testing Equipment
- TM 320 Screw Tester
- Properties of Materials
- SE 100 Universal Testing Frame, 400 kN
- WP 140 Fatigue Testing Machine
- WP 300 Universal Material Tester, 20 kN
- WP 300.04 Bending Device
- WP 300.10 Device for Shearing Experiments
- WP 300.11 Device for Cupping Experiments
- WP 310 Hydraulic Universal Material Tester, 50kN
- WP 400 Pendulum Impact Tester, 25 Nm
- WP 410 Pendulum Impact Tester, 300 Nm
- WP 500 Torsion Tester, 30Nm
- WP 510 Torsion Testing Machine, 200 Nm, Motor Driven
- WP 600 Creep Testing Machine
- Statics
- Mechatronics
- Engineering Drawing
- TZ 100 Three-Dimensional Display with Geometric Models
- TZ 110 Cylindrical Work Samples with Cut-Outs Parallel to Axis
- TZ 120 Cylindrical Work Samples with Slanted Cut-Outs
- TZ 130 Prismatic Work Samples with Cut-Outs Parallel to Edges
- TZ 140 Prismatic Work Samples with Slanted Cut-Outs
- TZ 200.01 Bending Device
- TZ 200.02 Bearing Housing, Casting
- TZ 200.04 Drilling Jig for a Casting
- TZ 200.06 Drilling Jig for an Annular Disc
- TZ 200.07 Lever Shears
- TZ 200.08 Safety Catch
- TZ 200.09 Drilling Jig for Flat Part
- TZ 200.11 Bending Device Assembly Kit
- TZ 200.61 Drawing Demonstration: Drilling Jig
- TZ 200.71 Lever Shears Assembly Kit
- TZ 300 Lever Press Assembly Kit
- Dimensional Metrology
- PT 101 Dimensional Metrology I: Training Kit 1
- PT 102 Dimensional Metrology I: Training Kit 2
- PT 103 Dimensional Metrology I: Training Kit 3
- PT 104 Dimensional Metrology I: Training Kit 4
- PT 105 Dimensional Metrology I: Training Kit 5
- PT 106 Dimensional Metrology I: Training Kit 6
- PT 201 Dimensional Metrology II: Training Kit 1
- PT 202 Dimensional Metrology II: Training Kit 2
- Fasteners and Machine Parts
- MG 100 Instructional Kit: Assembly with Dowel Pins
- MG 110 Instructional Kit: Assembly with Keys
- MG 120 Instructional Kit: Assembly with Taper Keys
- MG 200 Instructional Kit: Threaded Fasteners and Lock Washers
- MG 901 Nuts and Bolts Kit
- MG 903 Screw-Locking Devices Kit
- MG 905 Thread Types Kit
- MG 911 Roller Bearings Kit
- Manufacturing Engineering
- Assembly Projects
- HL 960 Assembly Station: Pipes and Valves and Fittings
- HL 960.01 Assembly and Alignment of Pumps and Drives
- MT 110 Assembly Station: Spur Wheel / Worm Gear Mechanism
- MT 110.02 Assembly Exercise: Spur Wheel / Worm Gear Mechanism
- MT 140 Assembly Station: Piston Compressor
- MT 140.01 Assembly Exercise Piston Compressor: Functional Test
- MT 140.02 Assembly Exercise: Piston Compressor
- MT 140.20 Multimedia Learning Software: Piston Compressor
- MT 152 Assembly Exercise: Spur Gear
- MT 154 Assembly Exercise: Shut-off Valve
- MT 156 Assembly Exercise: Wedge Gate Valve and Angle Seat Valve
- MT 157 Assembly Exercise: Butterfly Valve and Non-Return Valve
- MT 158 Assembly Exercise: Ball Valve and Shut-off Valve
- MT 162 Hydraulic Valves and Fittings Test Stand
- MT 170 Assembly Exercise: Shaft with Journal Bearings
- MT 171 Assembly Exercise: Hydrodynamic Journal Bearing
- MT 172 Alignment of Drives, Shafts and Gears
- Maintenance
- HL 962 Assembly Stand for Pumps
- HL 962.01 Standard Chemicals Pump
- HL 962.02 Canned Motor Pump
- HL 962.03 Side Channel Pump
- HL 962.04 Standard Chemicals Pump with Magnetic Clutch
- MT 180 Assembly & Maintenance Exercise: Centrifugal Pump
- MT 181 Assembly & Maintenance Exercise: Multi-Stage Centrifugal Pump
- MT 182 Assembly & Maintenance Exercise: Screw Pump
- MT 183 Assembly & Maintenance Exercise: Diaphragm Pump
- MT 184 Assembly & Maintenance Exercise: Piston Pump
- MT 185 Assembly & Maintenance Exercise: In-Line Centrifugal Pump
- MT 186 Assembly & Maintenance Exercise: Gear Pump
- MT 190 Assembly Project: Materials Tester
- MT 190.01 Assembly Project: Data Acquisition for Materials Tester
- MT 210 Assembly & Maintenance Exercise: Refrigeration
- RT 395 Maintenance of Valves and Fittings and Actuators
- RT 396 Pump and Valves and Fittings Test Stand
- Machinery Diagnosis
- PT 500 Machinery Diagnostic System, Base Unit
- PT 500.04 Computerised Vibration Analyser
- PT 500.05 Brake & Load Unit
- PT 500.10 Elastic Shaft Kit
- PT 500.11 Crack Detection in Rotating Shaft Kit
- PT 500.12 Roller Bearing Faults Kit
- PT 500.13 Couplings Kit
- PT 500.14 Belt Drive Kit
- PT 500.15 Damage to Gears Kit
- PT 500.16 Crank Mechanism Kit
- PT 500.17 Cavitation in Pumps Kit
- PT 500.18 Vibrations in Fans Kit
- PT 500.19 PT 500.19 Electromechanical Vibrations Kit
- Automation
- IA 110 Calibrating a Pressure Sensor
- IA 120 Principles of Industrial Sensors
- IA 130 PLC Module
- IA 210 PLC Application: Material Handling Process
- IA 520 Computer Integrated Manufacturing and Handling System
- RT 121 Fuzzy Control: Ball-on-Beam
- RT 122 Fuzzy Control: Inverted Pendulum
- RT 123 Fuzzy Control: Ball-on-Plate
- RT 124 Fuzzy Control: Carrier Vehicle with Inverted Pendulum
- RT 700 Training System: Fundamentals of Hydraulics
- RT 701 Components Set Electrohydraulics
- RT 710 Hydraulic Servo System
- RT 770 Training System:Pneumatics, Electro-Pneumatics and PLC
- Engineering Drawing
- Thermal Engineering and HVAC
- Fundamentals of Thermodynamics
- WL 102 Change of State of Gases
- WL 201 Air Humidity Measurement
- WL 202 Fundamentals of Temperature Measurement
- WL 203 Methods of Pressure Measurement
- WL 204 Marcet Boiler
- WL 210 Flow Boiling Demonstration
- WL 220 Boiling Heat Transfer Unit
- WL 230 Condensation Unit
- WL 352 Free and Forced Convection Unit
- WL 362 Thermal Radiation Unit
- WL 372 Heat Conduction Unit
- WL 373 Heat Conduction in Gases and Liquids
- WL 374 Heat Conduction in Solids
- WL 375 Advanced Conduction Unit
- WL 376 Thermal Conductivity of Building Materials
- WL 377 Natural Convection and Radiation Apparatus
- WL 900 Heat Conduction Trainer
- WL 920 Advanced Temperature Measurement Trainer
- Applied Thermodynamics
- ET 300 Water-to-Air Heat Exchanger Trainer
- WL 110 Heat Exchanger Service Unit
- WL 110.01 Tubular Heat Exchanger
- WL 110.02 Plate Heat Exchanger
- WL 110.03 Shell & Tube Heat Exchanger
- WL 110.04 Jacketed Vessel with Stirrer & Coil
- WL 225 Fluidisation and Heat Transfer
- WL 302 Trainer Tubular Heat Exchanger
- WL 308 Heat Transfer in a Tubular Heat Exchanger
- WL 310 Cross-Flow Heat Exchanger
- WL 312 Multipurpose Air Duct and Heat Transfer Unit
- WL 314 Heat Transfer Bench
- WL 314.01 Parallel Flow Module
- WL 314.02 Mixed Flow Module
- WL 315C Heat Exchanger Trainer
- WL 320 Wet Cooling Tower
- WL 320.01 Cooling Column, Type 2
- WL 320.02 Cooling Column, Type 3
- WL 320.03 Cooling Column, Type 4
- WL 320.04 Cooling Column, Type 5
- Renewable Energies
- Power Engines and Machines
- ET 500 Two-Stage Piston Compressor
- ET 508 Simulation of a Two-Stage Air Compressor
- ET 512 Air Compressor Test Unit
- ET 513 Single-Stage Compressor
- ET 792 Gas Turbine
- ET 794 Gas Turbine with Power Turbine
- ET 795 Simulation of a Gas Turbine
- ET 796 Gas Turbine Jet Engine
- ET 805 Steam Power Plant 20kW with Process Control System
- ET 805.50 Throttling Calorimeter
- ET 810 Single-Cylinder Steam Engine
- ET 813 Two-Cylinder Steam Engine
- ET 830 Steam Power Plant
- ET 830.01 Cooling Tower
- ET 833 Steam Power Plant 1,5kW with Process Control System
- ET 833.01 Cooling Tower
- ET 850 Steam Generator Module
- ET 851 Steam Turbine Module
- ET 860 Steam Boiler Safety & Control
- Internal Combustion Engines
- CT 100.11 Exhaust Gas Calorimeter for CT 110
- CT 100.13 Electronic Engine Indicating System for CT 110
- CT 100.20 Four-Stroke Petrol Engine for CT 110
- CT 100.21 Two-Stroke Petrol Engine for CT 110
- CT 100.22 Four-Stroke Diesel Engine for CT 110
- CT 100.23 Water-Cooled Four-Stroke Diesel Engine for CT 110
- CT 110 Test Stand for Single Cylinder Engines, 7,5kW
- CT 150 Four-Stroke Petrol Engine for CT 159
- CT 151 Four-Stroke Diesel Engine for CT 159
- CT 152 Four-Stroke Petrol Engine with Variable Compression for CT 159
- CT 153 Two-Stroke Petrol Engine for CT 159
- CT 159 Modular Test Stand for Single Cylinder Engines, 2.2kW
- CT 159.01 Electronic Engine Indicating System for CT 159
- CT 159.02 Exhaust Gas Analysing Unit
- CT 300 Engine Test Stand, 11kW
- CT 300.03 Single Cylinder Engine with Variable Compression for CT 300
- CT 300.09 Electronic Engine Indicating System for CT 300
- CT 400 Load Unit, 75kW, for 4-Cylinder Engines
- CT 400.01 4-Cylinder Petrol Engine
- CT 400.02 4-Cylinder Diesel Engine
- CT 400.09 Electronic Engine Indicating System for CT 400
- Refrigeration and Air Conditioning Technology
- ET 101 Simple Compression Refrigeration Circuit
- ET 102 Heat Pump Trainer
- ET 120 Cooling Using the Peltier Effect
- ET 122 Vortex Cooling Device
- ET 144 Electrical Installation in Refrigeration Systems
- ET 150.01 Refrigerant Filling and Evacuation Equipment
- ET 150.02 Tool Set
- ET 165 Refrigeration System with Open Compressor
- ET 170 Electrical Faults in Simple Air Conditioning Systems
- ET 171 Electrical Connection of Refrigerant Compressors
- ET 172 Electrical Faults in Refrigerant Compressors
- ET 174 Electrical Faults in Full Air Conditioning Systems
- ET 180 Pressure Switches in Refrigeration
- ET 181 Adjustment and Operation of Expansion Valves
- ET 192 Replacement of Refrigeration Components
- ET 340 Building Automation in Heating and Air Conditioning Systems
- ET 350 Changes of State in the Refrigeration Circuit
- ET 351C Thermodynamics of the Refrigeration Circuit
- ET 352 Steam Jet Compressor in Refrigeration Engineering
- ET 400 Refrigeration Circuit with Variable Load
- ET 405 Heat Pump for Cooling and Heating Operation
- ET 411C Compression Refrigeration System
- ET 412C Refrigeration System with Refrigeration and Freezing Chamber
- ET 420 Ice Stores in Refrigeration
- ET 422 Capacity Control and Faults in Refrigeration Systems
- ET 426 Capacity Control in Refrigeration Systems
- ET 428 Energy Efficiency in Refrigeration Systems
- ET 430 Refrigeration System withTwo-Stage Compression
- ET 431 Heat Exchangers in the Refrigeration Circuit
- ET 432 Behaviour of a Piston Compressor
- ET 441 Refrigeration Chamber and Defrosting Methods
- ET 450 Vehicle Air Conditioning
- ET 480 Absorption Refrigeration System
- ET 499.01 Cutaway Model: Hermetic Refrigerant Compressor
- ET 499.30 Cutaway Model: Ceiling Air Cooler
- ET 600 Conditioning of Room Air
- ET 605 Air Conditioning System Model
- ET 611 Air Conditioning System with Chamber
- ET 620 Air Conditioning and Ventilation System
- ET 630 Split System Air Conditioner
- ET 900 Introduction to Refrigeration
- ET 910 Refrigeration Training System, Base Unit
- ET 910.10 Refrigeration Components for Basic Experiments
- ET 910.11 Refrigeration Components for Advanced Experiments
- ET 915 HSI Training System Refrigeration and Air Conditioning Technology, Base Unit
- ET 915.01 Refrigerator Model
- ET 915.02 Model of a Refrigeration System with Refrigeration and Freezing Stage
- ET 915.06 Model of a Simple Air Conditioning System
- ET 915.07 Air Conditioning Model
- ET 930 Evaporator Control with Electronic Expansion Valve
- Heating and Ventilation in Buildings
- HL 101 Thermal Expansion Training Panel
- HL 102 Pipe Friction Training Panel
- HL 103 Fitting Loss Training Panel
- HL 104 Temperature Measurement Training Panel
- HL 105 Three-Way Mixing Valve Training Panel
- HL 106 Four-Way Mixing Valve Training Panel
- HL 107 Circulating Pumps Training Panel
- HL 108 Domestic Heating Circuit Training Panel
- HL 109 Safety Devices Training Panel
- HL 110 Expansion Vessel Training Panel
- HL 111 Fluid Friction Training Panel
- HL 112 Radiator Training Panel
- HL 113 Losses in Valves and Fittings Training Panel
- HL 210 Losses in Pipe Systems and Fittings
- HL 300 Central Heating System
- HL 305 Hydronic Balancing of Radiators
- HL 350 Oil Burner Demonstrator
- HL 351 Domestic Heating Boiler
- HL 352 Domestic Water Heating System
- HL 353 Hot Water Generator
- HL 353.01 Comparison of Different Heating Types
- HL 353.02 Heat Distribution and Control in Heating Systems
- HL 356 Demo Unit, Gas Burner
- HL 358 Forced Air Gas Burner Training Panel
- HL 360 Oil Tank Safety Trainer
- HL 392C Safety & Control in Heating Systems
- HL 500 Instantaneous Gas Heater
- HL 510 Domestic Gas Supply Training Panel
- HL 530 Training Panel Function of Gas Heater
- HL 620 Domestic Heating System Control Training Panel
- HL 630 Efficiency in Heating Technology
- HL 710 Air Duct Systems
- HL 720 Ventilation System
- HL 722 Control Unit for Ventilation System
- HL 860 Exhaust Gas Analyser
- Sanitary Systems
- Fundamentals of Thermodynamics
- Fluid Mechanics and Hydrology
- Fundamentals of Fluid Mechanics
- HM 115 Properties of Fluids & Hydrostatics Bench
- HM 135 Drag Coefficients for Spheres
- HM 150 Base Module for Experiments in Fluid Mechanics
- HM 150.01 Pipe Friction Apparatus
- HM 150.02 Dead-Weight Piston Gauge
- HM 150.03 Flow Over Weirs Accessory
- HM 150.04 Variable Speed Centrifugal Pump
- HM 150.05 Hydrostatic Pressure Apparatus
- HM 150.06 Stability of Floating Bodies
- HM 150.07 Bernoulli's Principle Demonstrator
- HM 150.08 Impact of Jet Apparatus
- HM 150.09 Orifice and Jet Velocity Apparatus
- HM 150.10 Flow Visualisation Apparatus
- HM 150.11 Fluid Friction Apparatus
- HM 150.12 Orifice Discharge Apparatus
- HM 150.13 Methods of Flow Measurement
- HM 150.14 Impeller Vortex Apparatus
- HM 150.16 Twin Centrifugal Pump Configurations
- HM 150.18 Osborne Reynolds Demonstrator
- HM 150.19 Operating Principle of a Pelton Turbine
- HM 150.20 Operating Principle of a Francis Turbine
- HM 150.21 Flow Channel
- HM 150.29 Losses in Bends and Fittings
- HM 150.39 Stability of a Floating Body, Additional Bodies
- HM 164 Flume for Open and Closed Flow
- Steady Incompressible Flow
- HM 111 Pipe Network Bench
- HM 112 Hydrodynamics Trainer / PC
- HM 120 Pipe Fitting Loss Demo Panel
- HM 122 Pressure Loss in Pipes
- HM 220 Airflow Study Unit
- HM 220.01 Venturi Tube
- HM 220.02 Boundary Layer Flow
- HM 225 Aerodynamics Trainer
- HM 225.03 Bernoulli's Equation Apparatus
- HM 225.05 Flow Around a Bend
- HM 225.07 Round Turbulent Jet Apparatus
- HM 240 Principles of Airflow
- HM 240.03 Electronic Pitot Sensor
- HM 240.04 Cylinder Pressure Distribution
- HM 240.05 Pipe Fittings
- HM 240.06 Heat Transfer
- HM 241 Principles of Hydraulics
- HM 500 Flow Meter Trainer
- HM 500.04 Electromagnetic Flow Meter
- HM 500.10 Paddle Wheel Flow Meter
- HM 500.13 Orifice Plate Flow Meter with Transducer
- RT 390 Test Stand for Control Valves
- Flow around Bodies
- HM 133 Visualisation of Flow Fields
- HM 136 Flow through Packed Columns
- HM 152 Potential Flow
- HM 153 Visualisation of Different Flows
- HM 170 Open Wind Tunnel
- HM 170.20 Aerofoil, Spring-Mounted
- HM 170.28 Wake Measurement
- HM 225.02 Boundary Layers
- HM 225.04 Drag Forces
- HM 225.06 Coanda Effect
- HM 225.08 Visualisation of Streamlines
- HM 226 Wind Tunnel for Visualisation of Streamlines
- Steady Flow of Compressible Fluids
- Examples of Transient Flow
- Hydraulic Fluid Energy Machines
- HM 210 Characteristic Variables of a Radial Fan
- HM 215 Two-Stage Axial - Flow Fan
- HM 270 Air-Operated Impulse Turbine
- HM 272 Air-Operated Reaction Turbine
- HM 280 Experiments with a Radial Fan
- HM 282 Experiments with an Axial Fan
- HM 283 Experiments with a Centrifugal Pump
- HM 284 Series and Parallel Connected Pumps
- HM 285 Experiments with a Piston Pump
- HM 286 Experiments with a Gear Pump
- HM 287 Experiments with an Axial Turbine
- HM 288 Radial-Flow Reaction Turbine Demonstrator
- HM 289 Pelton Turbine Demonstrator
- HM 290 Turbine Demonstrator Supply Module
- HM 291 Axial-Flow Impulse Turbine Demonstrator
- HM 292 Centrifugal Compressor Demonstrator
- HM 299 Pump and Compressor Unit
- HM 300 Basic Centrifugal Pump
- HM 305 Industrial Centrifugal Pump
- HM 332 Series / Parallel Pumps / PC
- HM 362 Comparison of Pumps
- HM 365 Universal Drive and Brake Unit
- HM 365.10 Water Pump Supply Module
- HM 365.11 Centrifugal Pump Module
- HM 365.14 Series / Parallel Pumps Module
- HM 365.15 Side Channel Pump Module
- HM 365.17 Piston Pump Module
- HM 365.20 Oil Pump Supply Module
- HM 365.31 Pelton and Francis Turbine
- HM 365.32 Turbine Supply Unit
- HM 365.45 Axial-Flow Pump Module
- HM 405 Axial-Flow Turbomachines
- HM 421 Kaplan Turbine Trainer
- HM 430C Francis Turbine Trainer
- HM 450.01 Pelton Turbine
- HM 450.02 Francis Turbine
- HM 450C Characteristic Variables of Hydraulic Turbomachines
- Components in Piping Systems and Plant Design
- HM 700.01 Cutaway Model: Standard Orifice Plate
- HM 700.02 Cutaway Model: Flow Nozzle
- HM 700.03 Cutaway Model: Standard Venturi Meter
- HM 700.04 Cutaway Model: Straight-Way Valve
- HM 700.05 Cutaway Model: Corner Valve
- HM 700.06 Cutaway Model: Angle Seat Valve
- HM 700.07 Cutaway Model: Non-Return Valve
- HM 700.08 Cutaway Model: Pressure Reducing Valve
- HM 700.09 Cutaway Model: Strainer
- HM 700.10 Cutaway Model: Gate Valve
- HM 700.11 Cutaway Model: Straight-Way Plug Valve
- HM 700.12 Cutaway Model: 3-Way Plug Valve
- HM 700.13 Cutaway Model: Ball Valve
- HM 700.14 Cutaway Model: Safety Valve
- HM 700.15 Cutaway Models: Various Screwed Pipe Connections
- HM 700.16 Cutaway Models: Pressure Gauges
- HM 700.17 Cutaway Model: Centrifugal Pump
- HM 700.20 Cutaway Model: Piston Pump
- HM 700.22 Cutaway Model: Gear Pump
- VS 101 Cutaway Model: Underground Hydrant
- VS 102 Cutaway Model: Resilient Seated Gate Valve
- VS 103 Cutaway Model: Screw Down Valve
- VS 104 Cutaway Model: Changeover Valve
- VS 105 Cutaway Model: Gas Meter
- VS 106 Cutaway Model: Backflow Preventer
- VS 107 Cutaway Model: Non-Return Butterfly Valve
- VS 108 Cutaway Model: Water Meter
- VS 109 Cutaway Model: Strainer
- Hydraulics for Civil and Environmental Engineering
- Fundamentals of Fluid Mechanics
- Process Engineering
- Fundamentals of Control Engineering
- Components and Calibration
- Simple Process Engineering Control Systems
- RT 450 Process Automation Training System: Base Module
- RT 450.01 Controlled System Module: Level
- RT 450.02 Controlled System Module: Flow
- RT 450.03 Controlled System Module: Pressure
- RT 450.04 Controlled SystemModule: Temperature
- RT 450.40 Visualisation Software
- RT 512 Level Control Trainer
- RT 522 Flow Control Trainer
- RT 532 Pressure Control Trainer
- RT 542 Temperature Control Trainer
- RT 552 pH-Value Control Trainer
- RT 614 Level Control Demonstration Unit
- RT 624 Flow Control Demonstration Unit
- RT 634 Pressure Control Demonstration Unit
- RT 644 Temperature Control Demonstration Unit
- RT 650.40 I&C Software for RT 614 - RT 674 Series
- RT 650.50 Process Control Software for RT 512 - RT 552 Series
- RT 674 Flow / Level Control Demonstration Unit
- Complex Process Engineering Control Systems
- RT 578 Control of 4 Variables from Process Engineering
- RT 580 Fault Finding in Control Systems
- RT 586 Control of Water Quality
- RT 590 Process Control Engineering Experimentation Plant
- RT 681 Multivariable Control: Vacuum Degassing
- RT 682 Multivariable Control: Stirred Tank
- RT 800 PLC Application: Mixing Process
- Fundamentals of Process Engineering
- Mechanical Process Engineering
- CE 110 Diffusion in Liquids and Gases
- CE 115 Fundamentals of Sedimentation
- CE 116 Cake and Depth Filtration
- CE 117 Flow through Particle Layers
- CE 200 Flow Properties of Bulk Solids
- CE 210 Flow of Bulk Solids from Silos
- CE 220 Fluidised Bed Formation
- CE 225 Hydrocyclone
- CE 235 Gas Cyclone
- CE 245 Ball Mill
- CE 250 Pneumatic Transport
- CE 255 Rolling Agglomeration
- CE 275 Gas Flow Classification
- CE 280 Magnetic Separation
- CE 283 Drum Cell Filter
- CE 284 Nutsche Vacuum Filter
- CE 285 Suspension Production Unit
- CE 286 Nutsche Pressure Filter
- CE 287 Plate and Frame Filter Press
- CE 320 Stirring
- Chemical Process Engineering
- Thermal Process Engineering
- Biological Process Engineering
- Water Treatment
- CE 300 Ion Exchange
- CE 530 Reverse Osmosis
- CE 579 Depth Filtration
- CE 581 Water Treatment Plant 1
- CE 582 Water Treatment Plant 2
- CE 583 Adsorption
- CE 584 Advanced Oxidation
- CE 586 Precipitation and Flocculation
- CE 587 Dissolved Air Flotation
- CE 701 Biofilm Process
- CE 702 Anaerobic Water Treatment
- CE 705 Activated Sludge Process
- Engineering Mechanics and Machine Elements
- K AND H Products
- Instrumentation
- Gwinstek
- Oscilloscopes
- Spectrum Analyzers
- Signal Sources
- Power Supplies
- Basic T & M
- Accessories
- Test Leads / Cables / Probes
- GCP-201
- GCP-206P/425P
- GCP-530/1030
- GDP-025/GDP-050
- GDP-100
- GHT-105
- GHT-107A
- GHT-108
- GHT-109
- GHT-110
- GHT-113
- GHT-205
- GTL-101
- GTL-103
- GTL-104
- GTL-105A
- GTL-107A
- GTL-108A
- GTL-110
- GTL-115
- GTL-117
- GTL-161
- GTL-201A
- GTL-202
- GTL-203
- GTL-204
- GTL-232
- GTL-232A
- GTL-242
- GTL-246
- GTL-247
- GTL-301
- GTL-302
- GTL-303
- GTL-304
- GTL-401
- GTP-020A-4
- GTP-060A-2
- GTP-060A-4
- GTP-100A-4
- GTP-150A-2
- GTP-250A-2
- GTP-3000
- PT-100
- Adaptors
- LCR Fixtures
- Cases / Bags / Racks
- Special Applications
- Test Leads / Cables / Probes
- Metrel
- Electrical Installations Safety
- Multifunction Testers (Eurotest Family)
- MI 2086 Eurotest 61557
- MI 2087 Instaltest 61557
- MI 2088 Earth Insulation Tester
- MI 2093 Line Tracer
- MI 2150 Installcheck
- MI 3100 Eurotest EASI
- MI 3101 Eurotest AT
- MI 3102 Eurotest XE
- MI 3102H CL EurotestXE 2.5 kV
- MI 3105 Eurotest XA
- MI 3108 Eurotest PV
- MI 3109 Eurotest PV Lite
- MI 3125 Eurotest COMBO
- MI 3125B Eurotest COMBO
- Singlefunction Testers (Smartec Family)
- Demonstration Board
- Multifunction Testers (Eurotest Family)
- Power Quality Analysis
- High Voltage Insulation Diagnostics
- Machines / Appliances / Switchgear Safety
- Lan Cabling Certification
- Indoor Environment Quality
- Digital multimeters/ Current clamps/ Voltage Teste
- Equipment for Laboratories and Schools
- Transformers
- Electrical Installations Safety
- Fluke
- Clamp Meter
- Clamp Meter
- Fluke 360 AC Leakage Current Clamp Meter
- Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter
- Fluke 373 True-rms AC Clamp Meter
- Fluke 374 True-rms AC/DC Clamp Meter
- Fluke 375 True-rms AC/DC Clamp Meter
- Fluke 376 True-rms AC/DC Clamp Meter with iFlex
- Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex
- Fluke 771 Milliamp Process Clamp Meter
- Fluke 772 Milliamp Clamp Meters
- Fluke 773 Milliamp Process Clamp Meter
- HVAC Combo Kit
- Power Quality Clamp Meter
- True-rms 2000 A Clamp Meters
- True-rms HVAC Clamp Meter
- Digital Multimeter
- Fluke 113 Utility Multimeter
- Fluke 114 Digital Multimeter
- Fluke 115 Digital Multimeter
- Fluke 116 : Digital Multimeters
- Fluke 117 Digital Multimeter: The choice for commercial applications
- Fluke 1587/1577 : Insulation Multimeters
- Fluke 170 Series Digital Multimeters
- Fluke 27II / 28 II
- Fluke 289 : Industrial Logging Multimeter with TrendCapture
- Fluke 77-IV : Digital Multimeter
- Fluke 787 : Process Meter
- Fluke 789 : Process Meter
- Fluke 80 Series V Digital Multimeters: The Industrial Standard
- Fluke 88v : Deluxe Automotive Multimeter
- Handheld Multimeter: Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture
- Industrial Multimeters: Fluke 87V Ex Intrinsically Safe True RMS Multimeter
- Earth Ground
- Power Quality Tools
- Disturbance Analyzer: Fluke 1740 Series Three-Phase Power Quality Loggers
- Fluke 1735 : Power Logger
- Fluke 1760 : Three-Phase Power Quality Recorder
- Fluke 434 : PWR Power Analyzer
- Fluke Norma : High Precision Power Analyzers
- Power Quality Analysis: Fluke 430 Series Three-Phase Power Analyzer
- Power Quality Recorder
- Process Calibration Tools
- Fluke 705 : Loop Calibrator
- Fluke 707 Loop Calibrator
- Fluke 707Ex : Intrinsically safe loop calibrator
- Fluke 712 RTD
- Fluke 714 Thermocouple Calibrator
- Fluke 715 Volt/ mA Calibrator
- Fluke 717 : Pressure Calibrators
- Fluke 718 : Pressure Calibrator
- Fluke 718Ex : Pressure Calibrator
- Fluke 719 : Electric Pressure Calibrator
- Fluke 724 Temperature Calibrator
- Fluke 725 : Multifunction Process Calibrator
- Fluke 726 : Precision Multifunction Process Calibrator
- Fluke 743B : Documenting Process Calibrator
- Fluke 744 : Documenting Process Calibrator
- Fluke NEW 753 Documenting Process Calibrator
- Fluke NEW 754 Documenting Process Calibrator-HART
- Industrial Multimeters: Fluke 87V Ex Intrinsically Safe True RMS Multimeter (2)
- The 741B : Documenting Process Calibrator
- Thermometers
- Contact Thermometer: Fluke 561 Infrared and Contact Thermometer
- Fluke 116/322 HVAC Combo Kit - Includes Multimeter and Clampmeter
- Fluke 170 Series Digital Multimeters (2)
- Fluke 179/EDA2 Combo Kit Includes Meter and Deluxe Accessories
- Fluke 50 Series II Thermometers
- Fluke 572 Precision Infrared Thermometer
- Fluke 574 Precision Infrared Thermometer
- Fluke 62 Mini Infrared Thermometer, Infrared Thermometer Gun
- Fluke 62/322/1AC II IR Thermometer, Clamp Meter and Voltage Detector Kit
- Fluke 80 Series V Digital Multimeters: The Industrial Standard (2)
- Fluke FoodPro Plus Food Safety Thermometer
- Fluke FoodPro Thermometer
- Infrared and Contact Thermometers: Fluke 568 and 566
- Portable Thermometers: Fluke 60 Series Handheld Infrared Thermometers
- Thermometers, Fluke T5-600/62/1AC II IR Thermometers, Electrical Tester and Voltage Detector Kit
- HVAC IAQ Tools
- Clamp Meter
- Ideal
- Transmille
- Leap
- Aitelong
- Graphtec
- Gwinstek
GAD-201G
Instrumentation / Gwinstek / Basic T & M / Special Application Instruments /
featured
Automatic level & distortion measurements
Auto or Hold function selectable
0.1% ~ 100% in 7 distortion measuring ranges
20Hz ~ 20kHz in 3 continuous ranges
400Hz, 1kHz, 10kHz 3 frequency spots
1mVrms ~ 300Vrms in 12 ACV measuring ranges
description
Automatic Distrotion Meter
The GAD-201G distortion meter is aimed at total harmonic distortion (THD) and AC voltage measurement at audio frequency range, from 20 ~ 20kHz. Frequency and voltage value are displayed simultaneously on dual meters, with measurement range automatically switching over full scale. Shortcut keys are provided for commonly used 400Hz, 1kHz, and 10kHz measurement. Output terminal feeds basic waveform (X) and harmonic distortion (Y) to external monitoring device. Residual distortion, including hum and noise, is kept at a minimum level of 0.03%, making the GAD-201G ideal for high-class audio application.
