Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
PRODUCT
ET 795 Simulation of a Gas Turbine
Education / GUNT Hamburg / Thermal Engineering and HVAC / Power Engines and Machines /
description

Nine different process parameters can be set using potentiometers on the front panel of the experimental unit.

  The software provides a wide range of diagrams and graphs.

  The simulator can model the theoretical system limits without hazard, limits at which real systems would be destroyed or seriously damaged.

  The measured values are transmitted directly to a PC via USB. The data acquisition software is included.

 
Learning Objectives / Experiments
- Basic understanding of a gas turbine process
- Special features of a two-shaft turbine system with 
  free-running power turbine
- Thermodynamic state variables
- Starting a gas turbine
- Mapping performance characteristics
- Variation of efficiencies
- Change in the air ratio
Specification

[1] Simulated operation of a gas turbine system
[2] Modification of 9 system parameters using potentiometers
[3] Software calculates: air ratio, pressure ratio of compressor, efficiency, mass flow rates of gas and air, drive shaft power and generator power
[4] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista

 

Technical Data

9 potentiometers for the setting of
- intake pressure: 0...2bar abs.
- intake temperature: 0...100°C
- max. pressure ratio at max. speed: 0...10
- fuel mass flow rate, valve position: 0...100%
- fuel pressure: 0...10bar
- max. combustion chamber temperature:
  500...1500°C
- efficiency compressor/turbine: 0...100%

- efficiency power turbine: 0...100%
- generator load: 0...100%

Inputs and outputs

- 16x analogue in, 1x analogue out

- 4x digital in/out

Dimensions and Weight
l x w x h: 600 x 350 x 480 mm
Weight: approx. 15 kg
Scope of Delivery

1 experimental unit

1 LabVIEW software CD + USB cable

1 manual

Order Details
061.79500  ET 795  Simulation of a Gas Turbine