Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
PRODUCT
ET 102 Heat Pump Trainer
Education / GUNT Hamburg / Thermal Engineering and HVAC / Refrigeration and Air Conditioning Technology /
description

With the air-to-water heat pump ET 102 the ambient heat of the air is used to heat water.
  The heat pump circuit consists of a compressor, an evaporator with fan, a thermostatic expansion valve and a coaxial coil heat exchanger as condenser. All components are clearly arranged in the trainer. 
  The compressed refrigerant steam condenses in the outer pipe of the condenser and thereby discharges heat to the water in the inner pipe. The liquid refrigerant evaporates at low pressure in the finned tube evaporator and thereby absorbs heat from the ambient air.
  The hot water circuit consists of a tank, a pump and the condenser as heater. For a continuous operation the generated heat is dissipated via an external cooling water connection. The cooling water flow rate is set via a valve and measured.
  All relevant measured values are recorded by sensors. Displays at the respective locations of measurement indicate the measured values. This makes it easy to assign the measured values to the process. The simultaneous transmission of the measurements to a data recording software enables analysis and the representation of the process in the log p-h diagram. The software also displays the key characteristics variables of the process, such as the compressor pressure ratio and the coefficient of performance. 
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Learning Objectives / Experiments

- Design and operation of an air-to-water heat pump 
- Representation of the thermodynamic cycle in the

  log p-h diagram
- Energy balances
- Determination of important characteristic variables
  * compressor pressure ratio 
  * ideal coefficient of performance
  * real coefficient of performance
- Dependence of the real coefficient of performance

  on the  temperature difference (air-to-water)
- Operating behaviour under load

Specification
[1] Investigation of a heat pump with a water circuit as load
[2] Refrigeration circuit with compressor, evaporator with fan, thermostatic expansion valve and coaxial coil heat exchanger as condenser
[3] Hot water circuit with pump, tank and condenser as heater
[4] Additional cooling via pipe coil in the hot water tank and external cooling water
[5] Record of all relevant measured values and display directly at the location of measurement
[6] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista
  
Technical Data

Compressor
- capacity: 372W at 7.2/32°C
Coaxial coil heat exchanger (condenser)

- refrigerant content: 0.55L

- water content: 0.3L
Finned tube evaporator
- transfer area: approx. 0.175m²
Pump
- max. flow rate: 1.9m³/h
- max. head: 1.4m
Hot water tank volume: approx. 4.5L
 
Measuring ranges
- pressure: 2x -1...15bar
- temperature: 6x 0...100°C
- power: 1x 0...1200W
- flow rate (water): 1x 3...108L/h
- flow rate (cooling water): 1x 15...160L/h

 

Dimensions and Weight
l x w x h: 1400 x 550 x 1880 mm
Weight: approx. 135 kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase
Water connection
Scope of Delivery

1 trainer

1 LabVIEW software CD + USB cable

1 set of instructional material

Order Details

061.10200  ET 102  Heat Pump Trainer