Mutiara Nata Abadi  |  We work together, uniting our energy, and delivering the best solution
CE 702 Anaerobic Water Treatment
Education / GUNT Hamburg / Process Engineering / Water Treatment /

CE 702 demonstrates the biological anaerobic water treatment
  The trainer consists basically of two units:
- stirring tank with secondary clarifier
- UASB reactor
  Both units can be used separately or in combination. This allows both a single stage and a dual stage operation mode. In the dual stage operation a pump first transports the raw water into a stirred tank. In this tank the acidification of the organic substances dissolved in the raw water takes place. Here, anaerobic microorganisms convert the long-chain organic substances into short-chain organic substances. In a secondary clarifier the biomass discharged from the stirred tank is separated from the water. The separated biomass is pumped back into the stirring tank.
  From the secondary clarifier the raw water pretreated in this manner reaches a UASB reactor  (UASB: Upflow Anaerobic Sludge Blanket). Here the final step of the anaerobic degradation takes place. The previously formed short-chain substances are converted by special microorganisms into biogas (methane and carbon dioxide). Flow through the UASB reactor is from the bottom to the top. At the top of the UASB reactor there is a separation system. This separates the generated gas from the treated water. It also ensures that the biomass remains in the reactor. The gas can be discharged externally or collected. The treated water exits at the top end of the reactor and is collected in a tank.

  To adjust the flow velocity in the UASB reactor a of the treated water can be recirculated.

  The temperatures in the stirred tank and the UASB reactor can be controlled. The pH value in the stirred tank is measured. In addition, the pH value in the UASB reactor can be controlled. A software and webcam are available for data acquisition and visual inspection.
  Anaerobic biomass and analysis technology are required to perform the experiments. Recommended parameters are: COD (chemical oxygen demand), nitrogen and phosphor.
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

- familiarisation with anaerobic water treatment
- effects of temperature and pH value on anaerobic

- functional principle of a UASB reactor
- comparison of single stage and dual stage

  operation mode
- monitoring and optimisation of the operating


- identification of the following influencing factors
  * sludge loading
  * volumetric loading
  * flow velocity in the UASB reactor


[1] anaerobic degradation of organic substances 
[2] stirred tank with secondary clarifier
[3] UASB reactor with separation system
[4] separate supply unit with tanks for raw water and treated water
[5] single stage or dual stage operation mode
[6] temperatures in the stirred tank and the UASB reactor can be controlled 
[7] control of the pH value in the UASB reactor
[8] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista
[9] visual inspection with webcam


Technical Data

Stirred tank
- capacity: approx. 30L
Secondary clarifier
- capacity: 45L
UASB reactor
- capacity: approx. 50L
Tank for raw water and treated water
- capacity: each 180L
Raw water pump
- max. flow rate: 25L/h
Circulation pump
- max. flow rate: approx. 100L/h
Measuring ranges
- pH value: 1...14
- temperature: 0...60°C


Dimensions and Weight

LxWxH: 1300x790x1150mm (supply unit)

LxWxH: 2820x790x1990mm (trainer)
Weight: approx. 500kg

Required for Operation

400V, 50Hz, 3 phases or
400V, 60Hz, 3 phases or
230V, 60Hz, 3 phases or
230V, CSA, 3 phases

Water connection recommended
Drainage required

Scope of Delivery

1 trainer

1 supply unit
1 set of hoses

1 stopwatch

1 set of tools
1 LabVIEW software CD + USB cable
1 webcam
1 set of instructional material

Order Details
083.70200  CE 702  Anaerobic Water Treatment